PRODUCTS
High pressure spray guns | Accessories

High Pressure Accessories

Accessories for Ecco Airless Spray Guns

ECCOMANT - standard spray tip

Ecco Quick-TIP-self cleaning spray tip

The ECCOMANT tungsten carbide airless tips are manufactured to high standards of accuracy to ensure an accurate spray fan and promote long service life. The tips can be used with all Ecco airless spray guns as well as other spray guns. The tip is hold by the retaining ring of the gun. The table on the next page sets out the recommended tips for different types of paint together and the list below shows the standard sizes normally available for off-the-shelf-delivery.

The spray tip in Ecco Quick-TIP can easily be cleaned by reversing the tip lever 180° and a short paint blast will clear the spray tip orifice. The spray tip handle has an arrow, showing the spraying direction.

Ecco Quick-TIP is manufactured from the highest quality tungsten carbide and stainless steel to ensure long life. The holder for Ecco Quick-TIP ia available with thread that suits all airless spray guns.

Selection of spray tip

Recommended spray tips for different paint types. For other paint types, please contact your local Ecco distributor.

Paint type	Normal spray viscosity (sec.with SIS cup 4)	Recommended tips, inch
Paint type	Normal spray viscosity (sec.with SIS cup 4)	0.009	0.011	0.013	0.015	0.018	0.021	0.026	0.031	0.036
Lacquer	15-20	x	x	x
Acid hardening	15-25	x	x	x
Shop primer	13-25		x	x	x
Polyurethane	25-60		x	x	x	x	x
Alkyd lacquer	30-60		x	x	x	x
Zink epoxy	25-60				x	x	x
Modified vegetable oil	60-100		x	x	x	x	x
Epoxy tar	30-100					x	x	x	x	x
Latex paint	normaly unthinned					x	x	x	x	x
Solvent free epoxy	40-					x	x	x	x	x

Ordering No. >>>

Airless hoses

Connections

Eccoflex airless hose

T-piece for paint circulation up to the gun

Properties:

- Excellent resistance to paints, solvents and chemicals
- Excellent flexibility
- Extreme abrasion resistance
- Static freed-100%conductivity
- Light weight
- UV and ozone resistant

Inner tube:Polyamide
Reinforcement:Carbon steel wire brass plated
Cover:Polyurethane
Temp. range:-40ºC to +80ºC

Ordering No. >>>

Whip end hoses

Whip end for connection immediately before the gun for increased mobility. Length: 1m. Connection thread: 1/4" 18NPSM female-male
Ordering No. >>>

Teflon hose

Airless hose resistent for particularly aggressive fluids. Couplings and braid in stainless steel. Material inside hose wall: Teflon. Connection thread: 1/4" 18NPSM female.

Ordering No. >>>

Ecco ERGOTUBE™ Hp airless hose

Ecco ERGOTUBE™ Hp for use with all servo assisted spray guns 370. The high pressure paint hose is placed inside the air hose which leads the operating air to the spray gun. The gun is as easy to use as when using only one hose to the spray gun. Patented.

Ordering No. >>>

For paint circulation up to the spray gun or for connection of two airless spray guns to the same high pressure pump. Connection thread to gun: 1/4" 18NPSM female. Connection thread to hose:
1/4" 18NPSM male

Ordering No. >>>

Nipples

Jointing and connection nipples for high pressure hoses.

Ordering No. >>>

Couplings

Couplings with cap nit in plated steel.

Ordering No. >>>

Swiwel couplings for high pressure hoses

To be mounted between the gun and the hose for increased mobility. (Not intended for Ecco 510 or Ecco ERGOTUBE™ Hp)

Ordering No. >>>

Accessories for Ecco Hydric pumps

Hydric Col 10 return regulator

High pressure filter HP 60

For throttling of the returning flow in circulation when hot spraying. The special design of Hydric Col 10 makes it also suitable for throttling of small paint amounts reducing the risk for clogging in the throttling action to a minimum. The regulator has no internal pockets where loose particles can build up. This makes flushing of the equipment easier. Hydric Col 10 is made in stainless steel with throttling details in tungsten carbide to ensure a longer life time.

Max. working pressure: 360 bar
Connection thread: 1/4" 18 NPSM male

Ordering No. >>>

High pressure filter HPM 100

Housing in stainless steel complete with insert strainer and ball valves. Can be mounted on the paint outlet on all Ecco Hydric pumps.

Weight: 1.1 kg
Filter: 100 mesh
Max. working pressure: 400 bar
Paint inlet connection: 1/4" 18NPSM female
Paint outlet connection 1/4" 18NPSM male

Ordering No. >>>

Replacement filters for HPM 100

For ordering of strainer see table for spray tips under Accessories for Ecco Airless Spray Gun web page.

Ordering No. >>>

Housing in stainless steel complete with strainer. Can be mounted on the paint outlet on all Ecco Hydric pumps.
Weight: 2.0 kg
Filter: 60 mesh
Material: Stainless Steel
Max. working pressure: 400 bar (5 800 psi)
Paint inlets:
G1/4, 3/8 or G1/2 female
G1/2 normaly for pump connection
G3/8 bottom inlet (plugged)
G1/4 mormally for pressure relief
Paint outlet connection 1/4" 18NPSM male

Ordering No. >>>

Replacement filters for HP 60

For ordering of strainer see table for spray tips, under Accessories for Ecco Airless Spray Gun web page.

Ordering No. >>>

Adapter HP 60 to pump

Ordering No. >>>

Personal protection

Air filter

Air filter for breathing air. Can be connected directly to the air supply. The filter will remove particles larger than 0.01 µm oil fumes and odours. The filter will not remove methane, carbon monoxide or other toxic gases.

Ordering No. >>>

Air thermostat Vortex

For air conditioning of fresh air helmets and hoods. The temperature of the breathing air (warm/cold) is adjustable. . To be installed between air filter and helmet.

Ordering No. >>>

Hose for breathing air

Air hose made of wear resistant PVC. Approved by Swedish Authorities. Delivered per metre. Outer diam. 11 mm

Ordering No. >>>

Air preparation units

Air filter

For removal of dirt and moisture in air supply.

Separation:15µm

Ordering No. >>>

Air filter/regulator

Combined air filter and regulator. Capacity at 6 bar primary pressure: 1800 l/min

Connection thread: G1/2 female

Ordering No. >>>

Compressed air regulator

For setting of air pressure to pump.

Ordering No. >>>

Oil-fog lubricator

For lubrication of piston pumps.

Ordering No. >>>

Accessories for air preparation units

Ordering No. >>>

Air preparation units

Compressed air filter MINI FIL 08A-D	Compressed air reg. MINI REG 08A
Separation: 15µ Capacity at 6 bar primary pressure: 780 l/min Connection thread: G1/4 int. Ordering No. >>>	Capacity at 6 bar primary pressure: 540 l/min Connection thread: G1/4 int. Ordering No. >>>
Compressed air filter MIDI FIL 15-D	Oil-fog lubricator MIDI DIM 15-D
Separation: 15µ Capacity at 6 bar primary pressure: 2 280 l/min Connection thread: G1/2 int. Ordering No. >>>	For lubrication of piston pumps. Capacity at 6 bar primary pressure: 2 580 l/min Connection thread: G1/2 int. Ordering No. >>>
Air filter/regulator MIDI F/R 15B-DS	Accessories
Combined air filter and regulator including wall bracket Capacity at 6 bar primary pressure: 1800 l/min Connection thread: G1/2 int. Ordering No. >>>	Pressure gauge For MINI and MIDI pressure regulators. Measuring range 0-16 bar. Ordering No. >>>
	Wall bracket Wall bracket for MIDI-units. Ordering No. >>>